Drawing Machine

 Usage:

As an ideal equipment of drawing carbon wire from low to high tensile, it also can be used to draw steel, aluminum, alloy wire and etc. which can be widely used as steel wire, wire rope, construction products, galvanized wire, metal product, wire nails and etc.

Structure:

  The equipment consists of main reduction box, die case, wheel frame, sash brace and electrical control system. The spinning drawing blocks are driven by JZT series motor, with gear coupling runs changeable gears to reduce speed. The drawing blocks are vertically fixed in sealed box body. The gear is lubricated with oil.

 In order to lower residual heat on the surface of the block, the cooling means is installed at inside wall of the block. The wortle is soaked in cooling water to reduce its working temperature.

The equipment runs with carvl or linkage. It is equipped with the safety stop gear.

LW-1-6/560

LW-1-6/350

LW-1-7/450

  **Technical Data

Water-tank Drawing Machine

          Wire drawing machines include dry-drawing machines, water-tank drawing machines and its auxiliary facilities, which can process various high to low carbon steel wire and aluminum wire and etc. These wires are the main material of steel wire, wire nails, wire mesh, wire rope, cable wire and etc.

New models and improved machines are also can be provided upon request.

LT-15/350 Water Tank Drawing Machine

LT-9/550 Heavy Duty Water Tank Drawing Machine

**Technical Data